WLED with Alexa and Google Home: Voice Control, Presets by Voice and What Works
Set up WLED with Amazon Alexa (built in, no skill needed), call your presets by voice, fix discovery problems, and the routes to Google Home that actually work.
Quick answer: WLED works with Alexa without any skill or account. In Config›Sync Interfaces tick Emulate Alexa device, give it a name Alexa can understand (Alexa invocation name), save, and say “Alexa, discover devices”. To call presets by voice, set Also emulate devices to call the first to the number of presets you want (up to 9): each one shows up in Alexa as its own light, named after the preset. Google Home has no built-in route; it goes through Home Assistant or a Matter bridge.
What Alexa can and can’t do with WLED
WLED pretends to be a Philips Hue bulb on your network. The Echo finds it and controls it locally, without a cloud service. That gives you:
| You say | What WLED does |
|---|---|
| “Alexa, turn on Tree” | Turns the light on (or runs your Alexa On preset) |
| “Alexa, turn off Tree” | Turns it off (or runs your Alexa Off preset) |
| “Alexa, set Tree to 40 percent” | Sets the brightness |
| “Alexa, set Tree to red” | Sets color 1 of the main segment |
| “Alexa, set Tree to warm white” | Sets a white tone (on RGBW and CCT lights it uses the white LEDs) |
| “Alexa, turn on Christmas Show” | Runs the preset named Christmas Show (see below) |
What it can’t do: pick effects or palettes by name, or change speed. Anything beyond on, off, brightness and color goes through presets.
Set it up
- Open the light’s web UI, then Config›Sync Interfaces.
- Under Alexa Voice Assistant, tick Emulate Alexa device.
- Change Alexa invocation name from the default “Light” to something short and clear, like “Tree” or “Porch Lights”. Every WLED light starts out called Light, so with two lights you need two names.
- Click Save.
- Say “Alexa, discover devices”, or start a device scan in the Alexa app. The light shows up as a light.
If you change the name later, save, restart the light and run discovery again so Alexa learns the new name.
What you need: a real Echo speaker or Echo Show on the same network as the light. The Echo does the discovery and the control; the Alexa app on a phone can start a scan but can’t control the light by itself. Alexa-enabled third-party speakers and Fire TV sticks may not find it.
Presets by voice
This is the part most people miss, and it makes Alexa much more useful for holiday lights.
- Save the looks you want to call as presets in slots 1, 2, 3 and so on, with no gaps. Give them speakable names: “Christmas Show”, “Warm White”, “Candy Cane”.
- In Sync Interfaces, set Also emulate devices to call the first to how many presets you want, up to 9.
- Save, restart the light, and run discovery again.
Each preset now appears in Alexa as an extra light with the preset’s name. “Alexa, turn on Candy Cane” runs preset 3. Turning on one preset light marks the others as off, and turning any of them off turns the WLED light off.
Things to know:
- Only presets 1 to 9 can be exposed, and WLED stops at the first empty slot. If slot 2 is empty, only preset 1 shows up. Move presets around in the web UI so the voice ones come first.
- The names are read when the light starts. Rename a preset, restart the light, and run discovery again.
- Use names that don’t clash with other smart devices. Alexa doesn’t like two devices called “Tree”.
Alexa On and Off presets
By default “turn on” restores the last brightness. You can make it run a preset instead: in Config›Time & Macros, set Alexa On/Off Preset (under Timer & Alexa Presets on WLED 16, Macro presets on 0.14 and 0.15). With the On preset set to your Christmas playlist, “Alexa, turn on Tree” starts the show every time, not whatever ran last.
Routines
Every WLED light and preset light is a normal Alexa device, so Alexa routines can use them: “Alexa, Merry Christmas” turning on the tree preset and the porch, or a sunset routine. If the light should run on a schedule even when the internet is down, use WLED’s own timers instead (timers and sunset). They run on the light.
Several lights
Each controller gets its own invocation name, and Alexa groups them like any other lights (“Alexa, turn on Outside” for a group called Outside). For effects in sync across lights, let WLED do it: UDP sync makes the others follow one light (multiple lights). Tick Send Alexa notifications in Sync Interfaces so voice changes are sent to the other lights too.
Alexa can’t find the light
Work down this list:
- Same network. The Echo and the light must be on the same network and subnet. A separate IoT network or VLAN, or a guest network, blocks discovery unless your router forwards multicast between them.
- Client isolation. Some mesh systems and guest networks stop devices from seeing each other. Discovery uses multicast (SSDP); if your router has an “IGMP snooping” or “multicast enhancement” setting, try the other position.
- The light must be on the home network, not in its own WLED-AP hotspot (Wi-Fi setup).
- Restart both. Restart the light after changing Alexa settings, then the Echo, then scan again.
- Name. Two words that sound like words work best. “WLED1” or “ESP strip” often get misheard.
- Firmware without Alexa. Some small or custom builds leave Alexa out. Sync Interfaces then says “This firmware build does not include Alexa support”. All regular release builds include it, except the small ESP02 min build.
Preset devices only appear after the light has restarted, and the Alexa app lists them under Devices, Lights next to the main one.
Google Home and Google Assistant
WLED has no built-in Google Home support, and there’s no “emulate Google” switch. The routes that work:
Home Assistant (most flexible). Home Assistant finds WLED by itself, and its WLED integration shows the light, its presets and playlists. From there:
- With Home Assistant Cloud (a paid subscription), tick the WLED light in the Google Assistant settings, and it appears in Google Home within minutes.
- The manual Google Assistant setup in Home Assistant is free but takes a Google developer project and some patience.
- For presets by voice, make a Home Assistant script per look (“Christmas Show”) that selects the WLED preset, and expose the script. Google lists scripts as scenes: “Hey Google, activate Christmas Show”.
Problems with the Home Assistant side are covered in WLED and Home Assistant fixes.
A Matter bridge. A bridge that turns Home Assistant devices into Matter devices (Home Assistant Matter Hub, Matterbridge and similar) makes WLED show up in Google Home, Apple Home and Alexa as a Matter light. Matter covers on, off, brightness and color, not presets. The options are compared in WLED in Apple Home.
Through Alexa? No. Google can’t control devices that only exist in Alexa.
FAQ
Does WLED work with Alexa without a skill? Yes. WLED emulates a Hue bulb, which Echo speakers control locally. Tick Emulate Alexa device in Sync Interfaces and run discovery.
Can Alexa change WLED effects? Not directly. Save each look as a preset in slots 1 to 9 and expose them with “Also emulate devices to call the first”; each preset becomes a light you can turn on by name.
Why did Alexa find my light but not the presets? The presets must be in slots 1, 2, 3 without gaps, the number must be set, and the light must be restarted before discovery.
Does WLED work with Google Home? Not directly. Use Home Assistant (with Home Assistant Cloud or the manual Google setup) or a Matter bridge.
Does WLED support Matter or HomeKit? Not built in. Both go through a bridge; see WLED in Apple Home.